PTFE Suspension Powder

Description.

Everflon^TM PTFE Suspension Powder M series is a white powder with a small particle size. The small particle size of Everflon^TM PTFE M40&90 helps to minimize voids, even at relatively low molding pressures. Its most unique feature is the irregular, fibrous character of the particles. The fibrous particles promote good capture and uniform distribution of inorganic fillers when they are added to modify the mechanical properties of moldings. It offers an excellent combination of properties that are characteristic of EverflonTM fluoroplastic resins.

Everflon^TM PTFE Suspension Powder is preferred for moldings requiring optimum mechanical and electrical properties. Its low bulk density limits the size of moldings from a given mold or press opening. It is often preferred for making filled compounds, especially with metal powders that are difficult to mix because of density differences.

Storage&Handing.

Everflon^TM PTFE Suspension Powders’ preforming is easiest when the resin is uniformly between 21–27 °C (70–80 °F). As temperatures decline below this range, the resin will be increasingly difficult to mold without cracks and problems with condensed moisture. Higher temperatures inhibit flow and promote lumping.

Storage conditions should be set accordingly. Cleanliness is a critical requirement for successful use of Everflon^TM PTFE Suspension Powder. The white resin and high sintering temperatures cause even small foreign particles to become visible in finished moldings. Keep resin drums closed and clean. Good housekeeping and careful handling are essential.

Precautions

Before processing, please read the Materials Safety Data Sheet carefully. You could find them from www.everflon.com, or contact us +86-27-84888055 or our local service center, you also should could scan the QR code which on the package to download by your Smartphone.

Extra safety note:

1) Process only in well-ventilated areas.

2) Do not smoke in areas contaminated with powder/residue from these products.

3) Avoid eye contact.

4) If skin comes into contact with these products during handling, wash with soap and water afterwards.

5) Avoid contact with hot fluoropolymer.

Package

Everflon^TM PTFE Suspension Powder is are packaged in 25kg. (55lb ),PE bag, Hard paper drumsEv